Abrasive Blasting Machine
From ₹40,000 *
Indicative range: 40 K - 10 Lakh
A sand blasting machine is an industrial equipment that uses compressed air to propel abrasive media at high speed to remove rust, paint, scale, and corrosion from metal surfaces. Prices in India start at ₹40,000 and go up to ₹10 lakh, depending on capacity and automation.
Usually replies within one business day · Manufacturer in Jodhpur, India
Specifications
| Material | Mild Steel |
| Grade | Automatic, Semi-Automatic, Manual |
| Abrasive tank capacity | 50-1000 Kg |
| Tank volume - Approx. | 42-284 Litres |
| Abrasive media | Garnet, Aluminium Oxide, Steel Shot, Steel Grit, Glass Beads, Copper Slag |
| Abrasive Size | Approx. 16-80 Mesh |
| Cleaning Rate | Approx. 3-23 m²/hr |
| Voltage | 220-240 V | 50 Hz |
| Compressed air (80 psi) | 45 Cfm to 217 Cfm |
| Cleaning rate | 4 to 23 Seq.mtr/hr |
| Blast Hose Length (Mtrs) | 5 - 10 Mtrs. |
| Sandblast nozzle size (mm) | 5 - 10 mm |
| Accessories | Pressure Gauge, Exhaust Valve, Blast Hose, Manual /Remote Control Valve, Sandblast Nozzle, Air Filter / Moisture Separator, Pinch Valve / Abrasive Metering Valve |
Application
Highlighted use-cases so you can quickly match the machine to your job.
Sand blasting machines are used wherever rust, paint, scale, or surface contamination needs to be removed fast, cleanly, and completely - on surfaces and in spaces no hand tool or chemical can reach. Here is where industrial buyers actually use them:
Sand blasting reaches weld joints, pipe bends, tank internals, and structural corners that wire wheels and angle grinders physically cannot access. It delivers consistent cleaning across the entire surface - not just the flat, reachable areas.
Blasting creates the correct anchor profile (Ra / Rz) that coatings need to bond properly - often specified to SSPC-SP10 Near-White Metal or Sa 2.5 standards on industrial projects. No other method achieves this profile as consistently or as fast at scale.
Sand blasting strips rust down to bare metal in a fraction of the time mechanical methods take - and it does it evenly, reaching into corrosion pits that grinders miss entirely. A job that takes 4 hours with a grinder takes 30 minutes with a blast pot.
Old industrial coatings, marine antifouling paint, epoxy linings, and thermal spray coatings - sand blasting removes all of them without heat distortion, chemical residue, or substrate damage. Media selection (garnet, soda, plastic) determines how aggressively the surface is treated.
Sand blasting removes laitance, curing compounds, old coatings, and surface contamination from concrete floors, walls, and structures before waterproofing, epoxy flooring, or decorative coating application. It exposes the aggregate cleanly and creates the surface profile flooring systems require.
Sand blasting - or more precisely, abrasive blasting with controlled media - cleans brick, stone, and concrete facades, removing pollution deposits, biological growth, and old coatings without damaging the underlying substrate when the correct media and pressure are used.
On-site blasting of pressure vessels, storage tanks, heat exchangers, and plant equipment during scheduled shutdowns — this is the core reason portable blasting equipment exists. The machine comes to the asset, not the other way around.
After welding and heat treatment, metal surfaces carry weld spatter, heat scale, and oxidation that must be removed before inspection, coating, or assembly. Blasting does this in minutes - uniformly across the entire fabricated component.
Gallery
3 images — click any photo to view full size
Next step
Is this the right machine for your job?
Tell us your material, capacity and site conditions — we will confirm fit and share pricing for Sand Blasting Machine.
Product details
Airo Shot Blast Equipments manufactures and exports high-quality sand blasting machines designed for effective surface preparation. Our abrasive blasting machine helps remove rust, old paint, mill scale, and corrosion from metal and non-metal components before painting, coating, galvanizing, welding, or further processing.
Whether you need equipment for a fabrication workshop, automobile components, pipelines, structural steel, castings, or industrial maintenance, choosing the right sand blasting machine can improve cleaning consistency, productivity, and surface quality.
A sand blasting machine cleans and prepares surfaces by releasing abrasive media through a nozzle using compressed air. The impact strips rust, old coatings, scale, and oxidation, and can leave a surface profile that helps new coatings bond better.
Common abrasive options include garnet, aluminium oxide, steel shots, steel grit, glass beads, and copper slag - the right one depends on the base material, the contamination being removed, and the finish required.
A typical system includes:
Compressed air carries abrasive media from a pressure vessel through a hose and accelerates it through a sand blasting nozzle at the workpiece. On impact, the abrasive removes rust, paint, scale, and oxidation in one pass.
This exceeds manual grinding or chemical stripping for large areas, complex shapes, weld joints, pipes, tanks, and fabricated parts that need a consistent finish across the whole surface - grinding tends to leave uneven patches, and chemical stripping is slower and generates hazardous waste.
is movable equipment for on-site cleaning and finishing - built for workshops, construction sites, fabrication yards, and field maintenance where the job comes to the machine, not the other way around.
An enclosed system for safely blasting small to medium parts: metal components, castings, glass, moulds, and automotive parts.
automatic blasting machine runs the blasting cycle with minimal manual handling, giving repeatable results for high-volume, repetitive production.
Mixes abrasive with water to cut airborne dust - the right choice where dust control or a smoother finish matters more than blasting speed.
A large enclosed facility for oversized components, used in shipbuilding, structural steel, and heavy fabrication.
| Feature | Portable Machine | Cabinet Machine |
|---|---|---|
| Operation | On-site or workshop | Enclosed workshop operation |
| Mobility | Portable | Generally fixed |
| Best suited for | Large structures and components | Small and medium components |
| Working environment | Open/on-site setup | Enclosed cabinet |
| Abrasive recovery | Configuration dependent | Usually integrated |
| Dust collection | System dependent | Integrated with suitable systems |
| Typical users | Fabricators, contractors, maintenance teams | Workshops and component manufacturers |
Quick Guide: If your components can fit inside a cabinet, a sand blasting cabinet is usually the better choice, offering easier abrasive recovery, dust management, and lower media consumption. For large structures, pipelines, or components that cannot be moved, portable sand blasting equipment provides a practical solution for on-site blasting.
Selecting the right abrasive media is essential for achieving effective cleaning and the desired surface finish. Garnet, aluminium oxide, steel shot, steel grit, glass beads, and copper slag are commonly used, depending on the workpiece material, level of contamination, required surface profile, and final coating requirements.
Price ranges from ₹40,000 to ₹10 lakh, depending on capacity, automation level, nozzle specification, compressor requirement, abrasive recovery, and dust collection.
| Machine Type | Indicative Price Range |
| Portable sand blasting machine (manual) | ₹40,000 - ₹1 lakh |
| Sand blasting cabinet | ₹75,000 - ₹3 lakh |
| Semi-automatic/automatic systems | ₹2 lakh - ₹10 lakh |
For an exact quote, share: component size, base material, target cleaning rate, abrasive type, and your site location - we typically reply within 9 business hours.
Match the machine to your job using these factors:
Airo Shot Blast Equipments is the leading sand blasting machine manufacturer in India and a supplier of sand blasting equipment worldwide. We offer a comprehensive range of high-quality blasting machines, including sand blasting equipment, portable shot blasting machines, sand blasting cabinets, blast room, sand blasting hopper P7300R, abrasive blasting machines, grit blasting machines, shot blasting machines, granite engraving machines, and rust cleaning machines.
We also provide durable solutions for surface cleaning, rust removal, paint stripping, and finishing. We also supply blasting spare parts and accessories, including sand blasting nozzles, hoses, pinch valves, dust collectors, air compressor, and abrasive media. Our range includes thermal spray guns, metalizing guns, arc spray guns, and thermal spray wires for diverse industrial coating applications.
We've manufactured blasting equipment in Jodhpur since 2008. That's 18+ years, 8,000+ units installed, and 25+ countries served - the points below are what that experience has actually changed about how we build machines, not generic claims.
FAQs
Compare this model, request pricing, and understand how it fits your process.
Prices range from ₹40,000 for a basic portable unit to ₹10 lakh for automated systems, depending on capacity, automation, and accessories like dust collection and abrasive recovery.
Portable machines suit large or fixed structures like pipelines and structural steel. Cabinets suit small to medium parts that can be moved into an enclosed workspace, with easier dust control and abrasive recovery.
It depends on your material and finish target: garnet and aluminium oxide for general cleaning, steel shot or grit for heavier scale removal and reusable media, glass beads for a fine cosmetic finish, and copper slag for one-time industrial blasting.
Requirements vary by nozzle size and machine model, typically in the 20-85 CFM range at 80-100 psi. Check your specific machine's spec sheet before sizing a compressor.
Yes, we build blast rooms, cabinets, portable, automatic, manual, and custom fixtures for components that don't fit standard configurations.
Lead time depends on configuration and customization; standard portable units are typically the fastest. Share your requirements for an exact delivery estimate.
The Sand Blasting Machine in the Abrasive Blasting Machine range is intended for buyers comparing capacity, finish quality, and operating cost. Review the specifications and applications on this page, then tell us your part size and production rate — we will confirm whether this model is the best fit or recommend a closer alternative from Airo Shot Blast.
The Sand Blasting Machine is built for industrial surface preparation using abrasive blasting principles suited to its category. Check the description, specifications, and application notes above for media, utilities, and typical use-cases. Our team can explain setup, consumables, and maintenance when you inquire.
Get pricing
Share your requirement — we respond with suitability, options and quote details.
Quotes typically sent within 4 business hours
Keep investigating
