Suction Blasting Cabinet (SSB11082)

Suction Blasting Cabinet 

Sand blasting Cabinet is an abrasive blasting method used to remove deposits like rust, and paint from surfaces without damaging the original surface. Usually, a blast cabinet is used to remove calcium buildup from pool tiles or fungus deposits and it can also be used as a means to brighten crevices that have faded, due to a buildup of dirt or contaminants.

As we know sand blasting machine process can be done in open and in a cabinet. To avoid lung diseases we should choose cabinet blasting. Sand blasting cabinet works similarly as suction blasting cabinets the only difference is that sand is used as the abrasive media in sand blasting cabinet to clean, smooth or etch any blasting surface.

SPECIFICATIONS:

WORKING CHAMBER:

Height A                                                      900 mm

Width B                                                       1200 mm

Depth C                                                      900 mm

DOOR OPENING:

Width G                                                       800 mm

Height H                                                      800 mm

OVERALL DIMENSIONS:

Height                                                          D 2235 mm

Width                                                           1365 mm

Depth P                                                       1700 mm                        

SLURRY PUMP:

Glandless Slurry Pump                                1 HP

DUST COLLECTOR:

Fan Motor                                                    1 HP Fan

Capacity                                                      400 CFM

Air Jet Orifice                                               3 mm 

Boron Carbide Nozzle                                  8 mm   

Pressure Gauge & Air Regulator fitted         One No. Each 

Foot Switch & Door Limit Switch                   Provided for Safety Interlocking  

Compressed Air required at 80 psi               25 CFM   

Abrasive Storage Capacity                           42 [1.5] Ltrs[CFT]  

Recommended Abrasive Size                      100 Mesh to 700 Mesh.

UTILITIES (To be arranged by the user):

• Dry & oil-free compressed air and its connection up to the machine’s inlet.
• Abrasive blasting media is required for blasting.
• The air supply line should be 1" I.D., BSP.
• A.C. Electric supply of 415V/3P [4 wires] / 50 Hz & its connection up to machine’s control panel