Reverse Pulse Jet Pleated Filter Dust Collector is a unit of dust collector which is most commonly used in industries or factories. A high-pressure blasting of air is done to remove dust from the Pleated Filter bag. The blasted air enters from the top of the Pleated Filter bag tube, temporarily stopping the flow of dirty air. The sudden shock of air causes a wave of expansion to travel down the pleated filter bag. The flexing of the bag shatters and discharges or breaks the dust cake present over the pleated filter. The airburst is about 0.1 seconds and it takes about 0.5 seconds for the wave to travel down the length of the filter bag. Due to its very fast release, the blast of air does not interfere with contaminated gas flow. Therefore, Reverse Pulse Jet Pleated Filter Dust Collectors can operate continuously and are not usually compartmentalized. The blast of compressed air must be powerful enough to ensure that the wave will travel the entire length of the filter bag and break the dust cake. The efficiency of the cleaning system allows the unit to have a much higher gas than shaking and reverse air bag filters.
Pulse Jet Dust Collector
In the Pulse jet dust collector, the cleaning system consists of a sequential time controller. This sequential timer controls the solenoid valves. This compressed-air header momentary enters or pulse of high-pressure compressed air through the blowpipe into the filter tube. This pulse of air creates a reverse flow of air, which expands the filter cartridges to clean or remove the collected dust over the filter.
The cleaning procedure occurs on a row-by-row basis therefore only some of the total filter air is interrupted or stopped for cleaning allowing continuous outgoing of purified air.
Features and Benefits of Pulse Jet Dust Collector
- It is easy to operate and handle.
- Easy to install &remove the pleated filter bag.
- Low consumption of compressed air (for cleaning) is required.
- High filtering efficiency even for the finest dust particles.
- Filter media is selected as per the application of the dust collector.
Applications of Pulse Jet Dust Collector:
Reverse Pulse Jet Pleated Filter Dust Collector Price
Reverse Pulse Jet Pleated Filter Dust Collector Price depends on CFM and cleaning time of pleated bags or pleated filter. CFM means cubic per minute where CMM means cubic meter per minute. Airo Shot Blast is the largest Manufacturer of Reverse Pulse Jet plated Filted dust collectors in India at low cost and best productivity.
Facebook
Twitter
Linkedin
Google Plus