Sand Blasting Machine
From ₹42,000 *
Indicative range: 42K - 10Lakh
Looking for a sand blasting machine in Qatar? This guide covers portable, cabinet and blast room systems, pot sizes, compressor needs, abrasives, weather planning and safety for oil and gas, marine, industrial and construction work, so you can choose the right machine and request a quote.
Usually replies within one business day · Manufacturer in Jodhpur, India
Specifications
| Specification | Details |
| Material | Mild steel |
| Grade | Manual, semi-automatic, automatic |
| Abrasive tank capacity | 50 to 1,000 kg |
| Tank volume (approx.) | 42 to 284 litres |
| Abrasive media | Garnet, aluminium oxide, steel shot, steel grit, glass beads, copper slag |
| Abrasive size | Approx. 16 to 80 mesh |
| Cleaning rate | Approx. 3 to 23 m²/hr |
| Compressed air at 80 psi | 45 to 217 cfm |
| Blast hose length | 5 to 10 m |
| Sandblast nozzle size | 5 to 10 mm |
| Surface finish | Up to Sa 2.5 (ISO 8501-1) |
| Voltage | 220 to 240 V, 50 Hz |
| Accessories | Pressure gauge, exhaust valve, blast hose, manual or remote control valve, sandblast nozzle, air filter and moisture separator, pinch valve (abrasive metering valve) |
Application
Highlighted use-cases so you can quickly match the machine to your job.
Sand blasting machines in Qatar are used wherever steel, metal or concrete must be cleaned and prepared before coating. Here are ten main uses.
Pipelines, pressure vessels, tanks and process structures at sites such as Dukhan face heat, salt and chemical exposure. Blasting removes rust and old coatings to the required finish, such as Sa 2.5, before protective paint is applied. Portable pressure machines with steel grit are common here.
Plants at Ras Laffan and Mesaieed rely on steel storage tanks, pipework and structures that must stay corrosion-free for years. Blasting prepares surfaces during construction, shutdowns and maintenance, so coatings bond properly and last longer.
At Hamad Port, cranes, jetty piles, mooring steel and container equipment sit in salt air and spray. Blasting strips rust and failed paint, so recoating protects the steel for longer.
Hulls, decks, ballast tanks and offshore steel need heavy cleaning before repainting. A portable machine with a large pot blasts long stretches without refilling, which suits vessels and large marine structures.
Factories and processing plants need regular blasting of machinery, structural steel and storage tanks. Planned maintenance blasting removes scale and corrosion before small faults become costly shutdowns.
Boilers, pumps, cooling pipework and water tanks at power and desalination sites work in hot, humid conditions. Blasting prepares them for recoating and lining, and cabinets clean smaller parts removed during servicing.
Fabricators blast weld seams, remove mill scale and prepare beams, frames and plates before painting or galvanising. Blast cabinets and rooms suit this work, because the abrasive is recovered and reused.
Bridges, steel frames, towers and rail components need clean, profiled steel before coating. Blasting is also used to clean, texture and prepare concrete for repair, sealing or new overlays.
Heavy vehicles, cranes, tanks and engine parts are stripped of old paint and rust before restoration. Bench top and blast cabinets handle smaller parts with precise, controlled finishing, using glass beads or aluminium oxide where needed.
Workshops clean moulds, valves, tools and machined parts, and etch or texture metal and glass surfaces. Enclosed cabinets and vacuum blasting keep dust under control, and fine abrasives protect delicate surfaces.
Next step
Is this the right machine for your job?
Tell us your material, capacity and site conditions — we will confirm fit and share pricing for Sand Blasting Machine In Qatar.
Product details
Looking for the right Sand Blasting Machine in Qatar? From removing stubborn rust and old paint to preparing industrial surfaces for long-lasting coatings, the right equipment can make all the difference. Discover how to choose the best sand blasting machine for your industry, explore its key applications, and find the right solution for your business needs.
Steel left unprotected on Qatar’s coast rusts quickly, and paint laid over rust or mill scale peels. A sand blasting machine in Qatar solves this by driving abrasive onto the surface with compressed air until it is bare, clean and rough enough for a coating to grip. Airo Shot Blast builds portable, cabinet and blast room systems around your parts, your finish and the compressor you already own.
Read on to pick an industrial sand blasting machine in Qatar, size its compressor, choose an abrasive and plan around the weather. A good sand blasting machine choice starts with the job, not the catalogue.
Portable sand blasting machine: the choice for pipelines, tanks, jetties and anything too big to move. It travels to the work, and the P7150 to P71000 range covers small repair crews to long shifts.
Sand blasting cabinet: for valves, moulds and fabricated parts. The work stays enclosed and the abrasive is reused.
Bench top abrasive blasting cabinet: a compact option for tool rooms and repair benches.
Blast room system: for large parts and daily production, with full containment and abrasive recovery.
Vacuum blasting machine: collects abrasive at the nozzle, so it suits areas where dust is a problem.
Our portable pressure pots come in four sizes. Each pairs with a nozzle, an air demand and a compressor:
P7150: 150 kg of metallic abrasive (65 kg of sand), 5 mm nozzle, 60 cfm at 80 psi, 15 HP compressor.
P7300: 300 kg (130 kg sand), 6 mm nozzle, 85 cfm, 25 HP.
P7500: 500 kg (230 kg sand), 8 mm nozzle, 113 cfm, 40 HP.
P71000: 1,000 kg (460 kg sand), 10 mm nozzle, 213 cfm, 75 HP.
Pick the pot for how long you need to blast without refilling, then confirm the compressor can sustain the air. Compare cfm rather than HP alone, and allow roughly 20 percent extra for long shifts. Confirm the final specification with our engineers before ordering.
The pot is only the start. A complete setup adds a sand blasting hopper or pressure pot to hold the abrasive, a hose and tungsten carbide nozzle to deliver it, and a compressor with aftercooler, filter and water separator to keep the air dry. Add a dust collector for enclosed work, a recovery system if you reuse abrasive, and a supplied-air helmet, suit, gloves and boots for the operator.
Pressure, nozzle size, abrasive and distance decide the finish, and a deadman valve stops the blast the instant it is released. For a deeper walkthrough, see how a sand blasting machine works.
For long runs of identical parts, a wheel type shot blasting machine is usually quicker than air blasting.
General steel cleaning with low dust: garnet
Etching and fine finishing: aluminium oxide
Smooth cleaning and peening: steel shot
Bright or satin finishes on delicate parts: glass beads
Avoid free silica sand, because breathing its dust can cause lung disease. Match the abrasive to your coating specification, and favour reusable media wherever you can recover it. Our abrasives range covers the common choices.
On the coast, humidity is the main enemy. Damp air makes abrasive clump, blocks valves and lets flash rust form within hours of blasting. Dry the compressed air and coat quickly.
On cool winter nights and mornings, dew forms on steel. Check the dew point before every session, and keep steel at least 3°C above it.
In summer, heat is the hazard. Blast early or late, follow Qatar’s summer midday work rules, and provide shade, water and rest breaks.
In shamal wind and dust, pause open blasting or use screens, and keep air intakes covered.
The operator wears a supplied-air helmet, protective suit, gloves, boots and hearing protection, and only trained people run the machine.
The equipment is inspected every shift: pot, valves, hoses, couplings and nozzle. The deadman control must work, and the pressure must never exceed the rating. Release all pressure before opening the pot.
The site is barricaded, ventilated and earthed to control static.
The waste is handled with care. Test old paint for lead, and dispose of spent abrasive under Qatar’s environmental rules. Keep inspection records.
What surface and material are you blasting?
How large and heavy are the parts?
Which finish do you need, such as Sa 2.5 (ISO 8501-1)?
How many hours a day will it run?
Will it work on site, in a yard or in a workshop?
What is your compressor’s HP, cfm and pressure?
Is dust control or abrasive recovery required?
We select the pot, nozzle and abrasive around your actual parts and compressor, rather than selling a fixed model. You deal with one company for machines, dust collectors and abrasives, and receive clear specifications your engineers can check. We also give dry-air guidance for Qatar’s humid coast.
Send your answers to the questions above. Our engineers reply with a recommended machine and quote. After you confirm voltage, nozzle and abrasive, we pack the machine for export, prepare the shipping documents and arrange delivery to Qatar, with installation guidance and operator training support afterwards.
Tell us what you blast and where, and our engineers will recommend the machine, abrasive and set-up. Use our contact page, browse the product list or read about Airo Shot Blast.
Call: +91-7728877775
FAQs
Compare this model, request pricing, and understand how it fits your process.
It strips rust, scale and old coatings from steel and concrete, leaving a rough, clean surface that paint or lining can grip.
A portable pressure machine suits quay steel, tanks and pipework on site. Parts brought into a workshop suit a cabinet or blast room.
About 113 cfm at 80 psi, which suits a 40 HP compressor in our P7500 set-up.
Yes, with dry air. Use an aftercooler, filter and separator, keep abrasive sealed and coat soon after blasting.
Cooler months and early mornings or evenings work best. Avoid summer midday, and pause during strong shamal winds or dust.
No. Its dust can cause silicosis, so choose garnet, aluminium oxide or steel media instead.
Get pricing
Share your requirement — we respond with suitability, options and quote details.
Quotes typically sent within 4 business hours
Keep investigating
