HVOF Gun

Thermal Spray Equipments

HVOF Gun

Manufacturer Available in Stock

From ₹200,000 *

Indicative range: 2 Lakh - 10 Lakh

Review coating hardness and process fit for this HVOF Gun — share powder and part specs for a configured quote.

Usually replies within one business day · Manufacturer in Jodhpur, India

  • Manufacturer Airo Shot Blast, Jodhpur
  • Business Leading Supplier & Exporter · Trustseal Verified · ISO Certified
  • Payment 100% T/T, NEFT, RTGS

Specifications

Technical overview

Product HVOF Gun
Brand Airo Shot Blast Equipments
Types  Automatic, Manual
Spray Process High Velocity Oxy-Fuel Thermal Spraying
Fuel LPG / Propane / Hydrogen / Kerosene
Coating Thickness Approx. 50–500 µm
Coating Materials WC-Co, WC-CoCr, Cr?C?-NiCr, Ni-based and other carbide powders
Coating Bond Strength Typically >70 MPa
Cooling Air or water cooling
Weight HVOF-2800
Control Panel AP-2100, MP-2100
Power Supply 220 V / 1 P / 50/60 Hz
Powder Feeder PF-3350-HP, PF-700

Application

Where this product is used

Highlighted use-cases so you can quickly match the machine to your job.

Where Is an HVOF Gun Used?

An HVOF Gun is widely used for high-performance wear-resistant, corrosion-resistant, and hard-chrome replacement coatings on industrial components. It is commonly used in aerospace, automotive, textile machinery, power generation, oil & gas, pumps, valves, paper mills, steel plants, and mining equipment for coating shafts, rollers, sleeves, rolls, screws, valve seats, and other wear-prone parts.

01

Aerospace

HVOF Guns are used for hard surfacing, wear-resistant coatings, and hard chrome replacement on selected aerospace components requiring high-performance surface protection.

02

Textile Machinery

HVOF coatings are applied to textile machinery components for surface rebuilding, dimensional restoration, and hard surfacing, helping improve resistance to wear during continuous operation.

03

Automotive

HVOF technology is used for self-lubricating coatings, wear protection, and hard chrome replacement on selected automotive components and precision surfaces.

04

Power Generation

HVOF coatings provide hard surfacing, wear resistance, and anti-corrosion protection for selected power-generation components exposed to demanding operating conditions.

05

Oil & Gas, Pumps & Valves

HVOF coatings are used to protect shafts, sleeves, valve seats, pump components, and other parts against wear, erosion, and corrosion in oil and gas applications.

06

Paper, Steel & Mining

HVOF is suitable for coating rolls, screws, shafts, and other wear parts used in paper, steel, and mining industries where abrasion and surface wear are major concerns.

Next step

Is this the right machine for your job?

Tell us your material, capacity and site conditions — we will confirm fit and share pricing for HVOF Gun.

Call now WhatsApp

Video

See it in action

Product details

About HVOF Gun

An HVOF Gun (High-Velocity Oxy-Fuel Gun) is advanced thermal spray equipment designed to produce dense, strongly bonded coatings for wear resistance, corrosion protection, and hard-chrome replacement applications. Airo Shot Blast manufactures, supplies, and exports HVOF Guns in Jodhpur, India, available in manual and automatic configurations with compatible control panels and powder feeders. Our HVOF systems support coating materials such as tungsten carbide, chromium carbide, nickel-based alloys, and other carbide powders for demanding industrial applications. Contact Airo Shot Blast for HVOF Gun price, specifications, availability, and a customized quotation based on your component and coating requirements.

What Is an HVOF Gun?

An HVOF spray gun is a thermal spray gun that burns a fuel with oxygen inside a combustion chamber and forces the hot gases through a nozzle at supersonic speed. Powder is fed into that gas stream, heated and accelerated, and strikes the part at very high velocity. Because the particles hit so fast and are not overheated, the coating comes out dense, hard and firmly bonded, with low porosity and little oxidation.

How Does an HVOF Gun Work?

  • Blast the part: Clean it to a grey, rough, near-white surface with a blasting machine.
  • Feed the gases: Fuel (LPG, propane, hydrogen, or kerosene) and oxygen enter the gun at high pressure.
  • Combust: The mixture burns in the combustion chamber, and the hot gas expands through the nozzle at supersonic speed.
  • Inject the powder: A powder feeder meters powder into the gas stream.
  • Accelerate and heat: The powder is heated to a softened state and thrown at the surface.
  • Build the coating: Particles flatten into a dense layer, typically 50–500 µm thick.
  • Finish: The coating is usually ground and polished, giving a bright, smooth, silver-grey surface.

Key Benefits of Our HVOF Gun

  • Dense, low-porosity coatings: Better protection against wear and corrosion.
  • High bond strength: Typically above 70 MPa.
  • Hard carbide coatings: Tungsten carbide and chromium carbide for abrasion and erosion resistance.
  • Hard chrome replacement: A common, more environmentally friendly alternative to chrome plating.
  • Fine as-sprayed finish: Less grinding needed than rougher spray methods.
  • Low oxide content thanks to short particle dwell time.
  • Manual or automatic: Suited to repair shops and to repeat production on a manipulator or lathe.
  • Air or water cooling: Choose according to duty cycle.
  • Complete system: Gun, control panel, powder feeder and support from one manufacturer.

Coating Materials for an HVOF Gun

Powder Typical colour (as sprayed) Typical use
WC-Co (tungsten carbide cobalt) Dark grey Abrasion and sliding wear
WC-CoCr Dark grey Wear plus better corrosion resistance
Cr₃C₂-NiCr (chromium carbide nickel chromium) Silver-grey Wear and high-temperature oxidation resistance
Nickel-based alloys Silver / metallic grey Corrosion protection
Hastelloy, Inconel, Tribaloy Silver-grey Corrosion, heat and wear resistance
 

HVOF vs Powder Flame Spray vs Arc Spray vs Hard Chrome Plating

Feature HVOF Gun Powder Flame Spray Gun Arc Spray Gun Hard chrome plating
Process Supersonic oxy-fuel spray Oxy-fuel flame Electric arc, two wires Electroplating
Coating density Very high Medium Medium High
Bond strength Highest (>70 MPa) Good Good Good
Best for Carbides, wear and corrosion General alloys, repair Large-area zinc/aluminium Shafts, rods
Equipment cost Higher, from ₹2 Lakh Lower, from ₹45,000 From ₹70,000 Plating line
Environmental concern Low Low Low High (hexavalent chromium)

Short answer: Choose an HVOF gun when you need the densest, hardest coating, such as tungsten carbide, or when you want to replace hard chrome plating. Choose powder flame or arc spray for lower-cost or larger-area jobs.

How to Choose the Right HVOF Gun

  • Coating material: WC-Co, WC-CoCr, Cr₃C₂-NiCr, or a nickel alloy.
  • Part and job: shafts, rolls, and valves suit manual or lathe-mounted spraying.
  • Production rate: manual for repair, automatic for repeat work.
  • Fuel gas: LPG, propane, hydrogen, or kerosene, based on availability and cost at your site.
  • Feeder and controls: match the powder feeder (PF-3350-HP or PF-700) and control panel (AP-2100 or MP-2100).
  • Cooling: air or water.
  • Support equipment: air compressor, blasting machine, and a spray booth with dust and noise control.

HVOF Gun Price in India

The HVOF Gun price in India starts from approximately ₹2,00,000, with an indicative range of ₹2 lakh to ₹10 lakh, depending on the manual or automatic configuration, control panel and powder feeder model, fuel type, cooling system, accessories, manipulator or lathe setup, order quantity, and delivery location. Airo Shot Blast provides application-specific HVOF systems and can offer the latest price, specifications, availability, and customized quotation based on your coating requirements.

HVOF Spray Gun Manufacturers in India

We are the Manufacturer, Supplier & Exporter of Hvof spray gun, sand blasting machine, shot blasting machines, sand blasting cabinets, pressure blasting cabinet, suction blasting cabinet, grit blasting machine, thermal spray gun, zinc spray gun, thermal spray coating, arc spray gun, metalizing gun, abrasive media in Jodhpur, Rajasthan, India for sale.

FAQs

FAQs about HVOF Gun

Compare this model, request pricing, and understand how it fits your process.

What is an HVOF gun used for?

An HVOF gun sprays dense, hard carbide and alloy coatings to protect parts from wear, corrosion, and heat, and to replace hard chrome plating.

What is the price of an HVOF gun?

Our HVOF guns start from ₹2,00,000, with an indicative range of ₹2 Lakh to ₹10 Lakh.

Can HVOF replace hard chrome plating?

Yes. HVOF carbide coatings are widely used as a replacement for hard chrome in aerospace, automotive and industrial parts.

Do I need a powder feeder?

Yes. A powder feeder gives the steady powder flow HVOF needs. We offer the PF-3350-HP and PF-700.

Get pricing

Request a quote for HVOF Gun

Share your requirement — we respond with suitability, options and quote details.

Quotes typically sent within 4 business hours

Protected form. Your details are used only to respond to this inquiry.

Call WhatsApp