A Suction Blasting Cabinet is used with suction blast guns or large blasting cabinet guns. These guns direct a mixture of compressed air and abrasive media at high speed to remove corrosion, coatings, rust, etc. The blast stream from the sandblasting gun can produce a uniform texture or create an etched finish to increase bonding strength for coating in Suction Blasting Cabinet.
The high-performance small blasting cabinet gun gives a comfortable grip for the operator and permits precise control of the blast pattern. The gun keeps the air and blast nozzle carefully aligned to maximum blast efficiency and minimizes gun-body wear. The gun can work with most recyclable blast abrasive media, including glass beads, ceramics, aluminum oxide, and some sizes of steel grit and shot, so we can select the appropriate abrasive media for our application. Thus it is done in an appropriate cabinet such as sandblasting cabinet, shot blast cabinet, media blast cabinet, grit blast cabinet, etc.
Suction Blasting Cabinet Specification
WORKING CHAMBER:
Height 600 mm
Width B 600 mm
Depth C 600 mm
DOOR OPENING:
Width G 500 mm
Height H 500 mm
OVERALL DIMENSIONS:
Height D 1660 mm
Width 800 mm
Depth 1500 mm
SLURRY PUMP:
Glandless Slurry Pump 0,5 H.P.
DUST COLLECTOR:
Fan Motor 0.5 H.P
Fan Capacity 200 CFM
Air Jet Orifice 3 mm
Boron Carbide Nozzle 8 mm
Pressure Gauge & Air Regulator fitted One No. Each
Foot Switch & Door Limit Switch Provided for Safety Interlocking
Compressed Air required at 80 psi 25 CFM
Abrasive Storage Capacity 28 [1.0] Ltrs [CFT]
Recommended Abrasive Size 100 Mesh to 700 Mesh
UTILITIES (To be arranged by the user):
- Dry & oil-free compressed air and its connection up to the machine’s inlet.
- Abrasive media required for blasting.
- The air supply line should be 1" I.D., BSP.
- A.C. Electric supply of 415V/3P [4 wires] / 50 Hz & its connection up to machine’s control panel.
Facebook
Twitter
Linkedin
Google Plus